General Epoxy Glass is Bi-component epoxy adhesive transparent and practically odourless. Formulated for the permanent bonding of granites andmarbles, also of very light colours, it is suitable for bonding any kind of natural or engineered stone also to heterogeneousmaterials as it performs a good and very good adhesion on wood, metal, glass, concrete.After hardening, it is characterized by a very high transparency and vitreous structure.Adheres even on difficult surfaces or humid materials where the polyester adhesive have poor or null adhesion.Its negligible shrinkage allows the reparation of deep micro-cracks and hollows by only one operation.
- Very good adhesion between different materials and supports
- Adhesion on humid materials
- Very high transparency
- Resistant to the atmospheric agents, acid rains, sea water
- Resistant to the solvents, basic environment (so, suitable for concrete) and acids
- Negligible yellowing
- Almost null shrinkage
- Practically odorless
FIELDS OF USE
Bonding of any kind of stone and ceramic materials, both natural and synthetic, between them or to heterogeneous supportssuch as metal, wood, glass, concrete:
HOW TO USE
PREPARATION OF THE SURFACES. Clean the surfaces carefully and remove any trace of dust, concrete, gypsum, greasysubstances, etc. Better adhesion if the support is slightly roughened.
PREPARATION OF THE TEXTURE. Mix carefully the component A and the component B in the exact ratio as indicatedA:B=100:50. It is suggested the mixing of small quantity (max. 400-500 grams) to avoid a too much short time of use beforethe hardening reaction starts.
APPLICATION. Apply the obtained texture on the clean and dry support by using a toothed putty knife. In case of applicationto the iron, it is advisable the iron is sandblasted or anyway roughened.After 8 to 10 hours it is possible to move the bonded piece and after 24 hours from the application the piece can beeventually grinded/polished